带落角约束的变结构三维末制导律设计

分析导弹与目标水面舰艇之间三维空间的相对运动特性,并在此基础上进行带落角约束的变结构制导律设计。该制导律设计中,针对一次设计时切换面导数形式过于复杂的情况,作出变换进行二次设计,极大地简化模型;另外,由于目标信息难以获取,故将其视为扰动;最后通过数值仿真验证了所设计制导律的可行性和有效性,具有一定的工程应用价值。     

智能马达控制中心在海洋平台设计中的应用

介绍一种利用新型智能电机过载继电器E3 PLUS、现场通信总线DeviceNet及PLC等技术相结合的船舶智能马达控制系统,阐述智能马达控制中心(Smart MCC)的工作原理、功能及应用实例,该系统可以提供电机多种故障检测和诊断功能以及计算机集中控制,使马达控制系统逐步向自动化集成型发展,系统的性能和可靠性高,能最大限度地降低船舶整体运行成本,提高运行效率.     

计算机联锁软件仿真试验表格的运用

计算机联锁在现场模拟试验之前及软件修改后,电务段应进行全面的联锁仿真试验,并认真做好记录,仿真试验的内容按要求表格化,为此需要设计全面的试验表并应掌握试验方法。     

The Bid-rent Land Use Model of the simple,efficient, elegant,and effective model of land use and transportation

Integrated land use/transportation forecasting models add significant policy and infrastructure alternatives analysis capabilities to the urban planning process. The financial, time, and staff requirements to develop these models has put them beyond the reach of most small to medium sized urban areas. This paper presents the land use allocation submodel of the Simple, Efficient, Elegant, and Effective model of land use and transportation (SE³M), an integrated land use and transportation forecasting model founded upon Economic Base Theory and Bid-rent Theory. The Bid-rent Land Use Model (BLUM) is an agent based, spatial competition model utilizing unique utility curves for willingness to pay and incomes for budget constrained abilities to pay for each agent. The model structure, estimation, calibration, implementation, and validation are presented. With a single year of land use data available, the validation approach used the Kappa Index of Agreement to spatially check model outputs against base year control data while controlling for agreement by chance. The U.S. territory of Guam is used as the case study/proof of concept implementation for this model framework. Once calibrated, BLUM could solve the spatial competition problem on Guam in less than two minutes of processing time with over 90% accuracy.     

A hybrid optimization-simulation approach for robust weekly aircraft routing and retiming

We address the robust weekly aircraft routing and retiming problem, which requires determining weekly schedules for a heterogeneous fleet that maximizes the aircraft on-time performance, minimizes the total delay, and minimizes the number of delayed passengers. The fleet is required to serve a set of flights having known departure time windows while satisfying maintenance constraints. All flights are subject to random delays that may propagate through the network. We propose to solve this problem using a hybrid optimization-simulation approach based on a novel mixed-integer nonlinear programming model for the robust weekly aircraft maintenance routing problem. For this model, we provide an equivalent mixed-integer linear programming formulation that can be solved using a commercial solver. Furthermore, we describe a Monte-Carlo-based procedure for sequentially adjusting the flight departure times. We perform an extensive computational study using instances obtained from a major international airline, having up to 3387 flights and 164 aircraft, which demonstrates the efficacy of the proposed approach. Using the simulation software SimAir to assess the robustness of the solutions produced by our approach in comparison with that for the original solutions implemented by the airline, we found that on-time performance was improved by 9.8–16.0%, cumulative delay was reduced by 25.4–33.1%, and the number of delayed passengers was reduced by 8.2–51.6%.     

表面桨驱动装置关键技术研究

为检验表面桨驱动装置能否安全可靠地运行，采用UG进行双十字万向联轴节的运动仿真计算，运用有限元方法对各典型零部件进行强度计算及轴系回旋振动计算，采用系统矩阵法分析装置的扭转振动特性，结合轴系扭振计算与校中计算，采用理论公式对轴系进行综合强度校核，得到双十字万向联轴节的运动干涉数据、各典型零部件应力大小及分布情况、轴系扭振应力大小等数据，并对表面桨驱动装置设计计算中的关键技术进行了深入研究，提出了计算分析的流程，可为表面桨装置设计、计算与分析提供理论及工程指导。     

Evaluating the effects of bus design on passenger flow: Is agent-based simulation a feasible approach?

In this paper, we propose an agent-based simulation approach that is capable of simulating the flow of passengers on board buses and at bus stops. The intention is that it will be applied during vehicle development to analyze how vehicle design affects passenger flow, and thus also how it affects system performance such as dwell time. In turn, this could aid the developers in making design decisions early in the development process. Besides introducing the simulation tool itself, the paper explores the realism of the data generated by the tool. A number of passenger flow experiments featuring a full-scale bus mockup and 50 participants were carried out. The setup of these experiments mirrored a number of ‘bus journeys’ (regarding vehicle design, number of passengers boarding/alighting at each stop and so on) that had previously been simulated using the simulation tool. When the data from the simulations were compared with the data from the passenger flow experiments, it could be concluded that the tool is indeed able to generate realistic passenger flows, although with some errors when a large number of passengers board/alight. The simulated dwell times were rationally affected by the tested bus layout aspects. It was concluded that the tool makes it possible to evaluate how variations in bus layouts affect passenger flow, providing data of sufficiently high quality to be useful in early phases of vehicle design.     

6缸柴油机改用单排气总管的模拟计算与实验研究

某车用柴油机改型为船用，排气管相应地由风冷改成水冷。本文对原机进行了模拟计算和实验校核。在此基础上，对改用水冷单排气总管的机型进行模拟计算，对排气管结构，进、排气阀正时对柴油机运行的影响进行了分析。实验研究表明：采用单排气总管增压系统，新的机型能够满足功率要求，在低工况下燃油经济也较好。     

汽油机活塞组—气缸套整体耦合传热模型及应用

采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。通过将润滑油膜假设为一维热阻,建立了活塞组—气缸套整体耦合系统的三维传热模型,应用所开发的三维流体动压润滑分析程序对活塞环组沿周向瞬时变化的油膜厚度进行了计算与分析。以LJ377MV汽油机活塞组—气缸套零部件为对象进行了应用研究,获得了更为清晰的多部件间的相互传热关系。     

公路实时三维可视化系统构架

基于公路CAD研究成果以及计算机图形学领域的最新发展,提出高性能、高扩展性的公路实时三维可视化系统构架,讨论了地形原始数据的预处理、地表三维建模、道路三维建模、道路模型与地形模型的实时整合、景观及附属设施三维建模、高效的场景管理、地形层次细节模型等功能设计与软件实现技术,并采用设计模式设计了类之间的组织模型,利用C 和DirectX 9.0c开发了公路实时三维可视化原型系统。最后依托实际工程项目对原型系统进行了测试和验证,实现了实时三维可视化手段对公路设计过程的支持以及对设计成果进行实时评价的目的。